• Home
  • Safety Label Specifications

Safety Label Specifications

MARCH 2011

Regular Duty Labels
These labels are intended for interior use and depicted by an “r” on the CEMA Label Number as indicated on the “CEMA Safety Label Meanings”. 

Face Stock: 4 mil white vinyl (high tack perm) 50#
Adhesive: I406-K, Permanent Adhesive
Laminate: 1 mil clear Polyprolene Laminate
Ink: UV resistant inks
Temperature Service Range: ( – ) 65 to ( + ) 200 degrees
Temperature Application: ( + ) 35 degrees
Surfaces: High adhesion to most difficult substrates, especially plastics.

 

 

 

 

 

 

 

 

 

Severe Duty Labels
These labels are intended for exterior use and depicted by an “s” on the CEMA Label Number as indicated on the “CEMA Safety Label Meanings”

Face Stock: 4 mil white vinyl (high tack perm) 50#
Adhesive: I406-K, Permanent Adhesive
Laminate: 1.42 clear UV resistant Polyester Laminate
Ink: UV resistant inks
Temperature Service Range: ( – ) 40 to ( + ) 200 degrees
Temperature Application: ( + ) 50 degrees
Surfaces: Heat resistance, dimensional stability, outdoor use, weather resistance. Adheres to Stainless Steel, Aluminum, Painted surfaces.

Application Instructions
Proper procedures should be used in applying these or any other labels.

  1. Insure that the surface is cleaned and free of dirt, dust, grease, and moisture.
  2. If the surface is painted, insure that the paint is dry.
  3. Surface temperature above 40 degrees F.
  4. Press the label on after applying it to the surface. One or more passes over the label with a sponge or rubber roller will insure that the glue is in good contact with the majority of the surface to which it is expected to adhere
© 2014 CEMA
The Voice of the Conveyor Industry of the Americas