Safety Labels
CEMA Safety Labels – Labels that have been developed (5″x2.5″ & 3″x6″) for each OEM Conveyor. These labels point out standard safety issues associated with the operation and/or maintenance of the equipment. Listed below are the material spec’s, labels on one page and order form (if not using the CEMA Store).
NOTICE 1: To further promote conveyor industry safety the CEMA Safety Labels are not copyrighted.
- For those who prefer to have their own labels printed the only restriction on use of the CEMA designs is that the CEMA Part Number NOT BE USED and it should be replaced by some other company identifier such as a company part number.
NOTICE 2: CEMA NO LONGER STOCKS, PRINTS OR SELLS FOREIGN LANGUAGE LABELS.
CEMA Safety Label Brochure: Its purpose is to identify Danger, Warning, and Caution Safety Labels which identify known potential hazards associated with human operation in and around conveying equipment. It also includes Safety Label Placement Guidelines for differing categories of conveying equipment. To purchase use the order form above or go to the CEMA STORE. ($15.00) 36 pages.
Below are CEMAs Horizontal Safety Labels, to review CEMAs Vertical Safety Labels, Click here.
 |
CHR/CHS-930001: Purpose of this WARNING label is to be placed on removable guards to warn that operation of the machinery with guards removed would expose chains, belts, gears, shafts, pulleys, couplings, etc., which create hazards. (5″Wide x 2 1/2″ High) CEMA STORE, click to purchase. |
 |
CHR930002: Purpose of this WARNING label is a general warning to personnel that a conveyor’s moving parts, which operate unguared by necessity of function, i.e. belts, rollers, terminal pulleys, etc., create hazards to be avoided. For example, conveyors that stop and start by automatic control near operator work stations would use this label. (5″Wide x 2 1/2″ High) CEMA STORE, click to purchase. |
 |
CHR930002-W: Purpose of this WARNING label is the same as above (CHR930002). This is an Optional label to be placed either on the side or top of rails when space available does not permit application of the larger label. (5″ Wide x 1 1/2″ High) CEMA STORE, click to purchase. |
 |
CHR930003: Purpose of this DANGER label is to be placed on removable guards to warn that operation of the machinery with guards removed would expose chains, belts, gears, shafts, pulleys, couplings, etc. which create hazards.(5″Wide x 2 1/2″ High) CEMA STORE, click to purchase. |
 |
CHR930004: Purpose of this DANGER label is to be placed on 20′ foot centers, maximum, along conveyors that provide surfaces and profiles attractive, but hazardous, for climbing, sitting, walking, or riding. (5″Wide x 2 1’2″ High) CEMA STORE, click to purchase. |
 |
CHR930004-W: Purpose of this WARNING label is the same as above (CHR930004). This is an Optional label to be placed either on the side or top of rails when space available does not permit application of the larger label. (5″ Wide x 1 1/2″ High) CEMA STORE, click to purchase |
 |
CHR931005: Purpose of this WARNING label is to be located on conveyors where there are exposed moving parts which must be unguarded to facilitate function, i.e. rollers, pulleys, shafts, chains, etc. (5″Wide x 2 1/2″ High) CEMA STORE, click to purchase. |
 |
CHR93006: Purpose of this CAUTION label is to be placed at entrances to enclosed areas which would expose personnel to opeational or environmental hazards which should only be entered by trained and authorized personnel under specific conditions. Examples include lifting conveyors, transfer car aisleways, confined spaces, etc. (5″Wide x 2 1/2″ High) CEMA STORE, click to purchase. |
 |
CHR930007: Purpose of this CAUTION label is to be posted in clearly visible locations where personnel enter areas that contain low hanging obstructions, conveyors, or other types of framework that are exposed to accidental contact. (5″Wide x 2 1/2″ High) CEMA STORE, click to purchase. |
 |
CHR930008: Purpose of this CAUTION label is to be posted in clearly visible locations where personnel enter areas containing obstructions on the walking surface, i.e. floor mounted tracks, guards, power services, conveyors, etc., which are exposed to accidental contact. (5″Wide x 2 1/2″ High) CEMA STORE, click to purchase. |
 |
CHR930009: Purpose of this WARNING label is to warn maintenance personnel that conveyors should be shut off and locked out prior to servicing. Examples include, drives, take-ups, lubrication points which require guard removal. (5″Wide x 2 1/2″ High) CEMA STORE, click to purchase. |
 |
CHR930010: Purpose of this WARNING label is to be placed at inlets and on troughs and covers of drag conveyors to provide warning against cover or guard removal while in operation. (5″Wide x 2 1/2″ High) CEMA STORE, click to purchase. |
 |
CHR930011: Purpose of this WARNING label is to be placed on inlets and discharges, troughs, covers, and inspection doors of screw conveyors to provide warning against exposing moving parts while in operation. (5″Wide x 2 1/2″ High) CEMA STORE, click to purchase. |
 |
CHS950013: Purpose of this WARNING label is to be placed on rotary valves to warn that the equipment’s exposed moving parts create hazards to be avoided by locking out the equipment prior to servicing. (5″Wide x 2 1/2″ High) CEMA STORE, click to purchase. |
 |
CHS950014: Purpose of this CAUTION label is to be posted in clearly visible locations where personnel enter areas containing equipment which generates noise levels that require hearing protection. (5″Wide x 2 1/2″ High) This label is not kept in stock. Call for pricing. 239-514-3441 |
 |
CHS950015: Purpose of this CAUTION label is to be posted in clearly visible locations where personnel enter areas which may contain environmental hazards requiring breathing problems. (5″Wide x 2 1/2″ High) This label is not kept in stock. Call for pricing. 239-514-3441 |
 |
CHS950016: Purpose of this CAUTION label is to be placed on pressure vessels to warn personnel against the removal of covers, valves, accessways, or other appurtenances while the vessel is under pressure. (5″Wide x 2 1/2″High) CEMA STORE, click to purchase. |
 |
CHS950017: Purpose of this DANGER label is to provide a general warning to personnel that the equipment’s moving parts, which operate unguarded by necessity or function, i.e., air cylinders, etc. create hazards to be avoided. (5″Wide x 2 1/2″High) CEMA STORE, click to purchase. |
 |
CHS950018: Purpose of this CAUTION label is to be placed where personnel can be exposed to hot surfaces.NOTE: CEMA DOES NOT PRINT THIS LABEL, due to the variety of sizes that might be required and the lack of suitability of the standard label stock for the purpose. Local printing on a suitable stock is recommended based on the application requirements. |
 |
CHS950021: Purpose of this WARNING label is to be placed on fans to warn that the equipment’s exposed moving parts can create hazards to be avoided by locking out the equipment prior to servicing. (5″Wide x 2 1/2″High) CEMA STORE, click to purchase. |
 |
CHS950022: Purpose of this WARNING label is to provide a general warning to personnel against the removal of, or servicing of, pressurized parts of equipment which, if ignored, create hazards. (5″Wide x 2 1/2″High) CEMA STORE, click to purchase. |
 |
CHR951023: Purpose of this WARNING label is to provide a general warning to personnel that lineshaft conveyor utilizes a rotating shaft which may be hazardous if hair or loose clothing become entangled around the lineshaft. Also used on any other conveyors where the exposed shaft may cause similarly hazardous conditions. (5″Wide x 2 1/2″ High) CEMA STORE, click to purchase. |
 |
CHR000025: Purpose of this WARNING label is to indicate that a guard has been removed and should be re-mounted before returning the equipment to operation. It is designed to be placed inside the area that is guarded so that it is exposed when the guard is removed and is not exposed when the guard has been properly replaced. (5″Wide x 2 1/2″ High) CEMA STORE, click to purchase. |
 |
CHS991026: Purpose of the WARNING label is to be placed on top of the covers or gratings of drag and screw conveyors to warn personnel of the danger of possibly falling through and sustaining severe injury or death. This label is to be used in conjunction with CH_930010 and CH_930011. (5″Wide x 2 1/2″ High) CEMA STORE, click to purchase. |
 |
CHS050027: Purpose of this WARNING label is to be placed to alert personnel that lineshaft conveyors should not be operated without the lineshaft guard in place. If operated without the guard in place, the mechanism can grab body members, clothing and hair. (5″Wide x 2 1/2″ High) CEMA STORE, click to purchase. |
 |
CHS060028: Purpose of this CAUTION label is to be placed to alert personnel that proper installation, adjustment and maintenance of this equipment could cause damage to the system or people. (5″Wide x 2 1/2″ High CEMA STORE, click to purchase. |
 |
CHS060029: Purpose of this CAUTION label is to be placed to alert personnel that proper installation, adjustment and maintenance of this equipment could cause damage to the system or people. (5″Wide x 2 1/2″ High) CEMA STORE, click to purchase. |
 |
CHS060030: Purpose of this CAUTION label is to be placed to alert personnel that proper installation, adjustment and maintenance of this equipment could cause damage to the system or people. (5″Wide x 2 1/2″ High) CEMA STORE, click to purchase. |
 |
CHS060031: Purpose of this CAUTION label is to be placed to alert personnel that proper installation, adjustment and maintenance of this equipment could cause damage to the system or people. (5″Wide x 2 1/2″ High) CEMA STORE, click to purchase. |